{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide engraving cutter, spiral flutes 60°, TiAlN, ⌀ h6 DC: 3mm
Article no.: 208086 3
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h6
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 2 | |
| Helix angle | 35 degrees | |
| Countersink tip angle | 60 degrees | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 3 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 3 mm | |
| Feed fz in steel < 900 N/mm2 | 0.03 mm | |
| Shank tolerance | h6 | |
| Colour ring | green | |
| Corner chamfer angle | 30 degrees | |
| Type of product | Indexable end mill |
Identification & Classification
| Article number |
208086 3
Copy |
|
| EAN / GTIN |
4062406390426
Copy |
|
| Manufacturer number |
208086 3
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
180
suitable for / [m/min]
N
ISO code:
300
suitable for / [m/min]
N
ISO code:
220
suitable for / [m/min]
P
ISO code:
130
suitable for / [m/min]
P
ISO code:
115
suitable for / [m/min]
P
ISO code:
110
suitable for / [m/min]
P
ISO code:
80
suitable for / [m/min]
P
ISO code:
65
suitable for / [m/min]
H
ISO code:
35
suitable for / [m/min]
M
ISO code:
90
suitable for / [m/min]
M
ISO code:
70
suitable for / [m/min]
S
ISO code:
50
suitable for / [m/min]
K
ISO code:
100
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Outstanding surface qualities thanks to the 35° helix angle. For higher feed rates due to 2 cutting edges. Engraving cutter for universal use in virtually all materials. The newly developed coating effectively prevents built-up edges, even in aluminium or stainless steel.
Application:
For engraving contours.
Note:
fz for ae = 1.0×D