{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill with internal coolant supply HPC 8 mm
Article no.: 205592 8
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: HR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 3 | |
| Helix angle | 20 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Flute length Lc | 16 mm | |
| Overall length L | 63 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.04 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.045 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205592 8 | |
| EAN / GTIN | 4045197553157 | |
| Manufacturer number | 205592 8 |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
P
60
H
35
M
60
M
50
K
90
Description
Version:
With internal coolant supply.
The coolant is fed directly to the cutting edges.
This gives longer tool-life and complete swarf evacuation.
This is especially important when milling slots or pockets.
The coolant is fed directly to the cutting edges.
This gives longer tool-life and complete swarf evacuation.
This is especially important when milling slots or pockets.