{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel SlotMachine solid carbide roughing end mill HPC 10 mm
Article no.: 205556 10
Article code:
- Tool material: solid carbide
- Standard: Manufacturer’s standard
- Milling profile: NR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 5
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 5 | |
| Helix angle | 42 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 22 mm | |
| Overhang length L1 incl. recess | 58 mm | |
| minimum shank recess dia. D5 | 9 mm | |
| maximum shank recess dia. D6 | 9.7 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.06 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205556 10 | |
| EAN / GTIN | 4062406112134 | |
| Manufacturer number | 205556 10 |
Application Table
P
180
P
170
P
150
P
130
P
100
M
45
M
30
K
180
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core.
Plunge angle of up to 10° possible thanks to generous recess on the front face.
Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining.
Note:
Particularly long neck recess for avoiding interference contours.
With conically increasing recess to guarantee stability at long overhangs.
With conically increasing recess to guarantee stability at long overhangs.