{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill MTC with through-coolant 12 mm
Article no.: 203076 12
Article code:
- Tool material: solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | AlCrN | |
| Tool material | solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Flute length Lc | 26 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.09 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203076 12 | |
| EAN / GTIN | 4045197776358 | |
| Manufacturer number | 203076 12 |
Application Table
P
250
P
230
P
200
P
180
P
150
M
80
M
60
K
170
Description
Version:
For roughing and finishing up to 1.5×D into solid material at very high feed rates with smooth cutting action.
For cutting force reduction and better surface quality due to 45° helix.
Improved coating for a further reduction in cutting force combined with increased tool life.
For cutting force reduction and better surface quality due to 45° helix.
Improved coating for a further reduction in cutting force combined with increased tool life.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide roughing end mill MTC with through-coolant 12 mm
on request
In stock
18 pieces in stock
US $ 241.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
US $ 279.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
36 pieces in stock
US $ 210.68
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
54 pieces in stock
US $ 207.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
US $ 235.31
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | AlCrN | TiAlN | TiSi | AlCrN | TiAlN |
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.3×D for side milling | Full slot cutting depth 1×D ;0.3×D for side milling | Full slot cutting depth 1×D ;0.3×D for side milling | Full slot cutting depth 1×D ;0.4×D for side milling | Full slot cutting depth 1×D ;0.1×D |
| Overall length L | 83 | 83 | 83 | 83 | 83 |
| Through-coolant | yes | yes | yes | yes | yes |
| Tool material | solid carbide | Solid carbide | Solid carbide | solid carbide | solid carbide |
| No. of teeth Z | 4 | 4 | 4 | 4 | 4 |
| Machining strategy | MTC | HPC | HPC | HPC | HPC ;TPC |