{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill HPC 20 mm
Article no.: 203044 20
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Helix angle characteristic: unequal spacing
- Spacing of the cutters: unequal spacing
Product details
Technical Data
| Coating | TiXSi | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203044 20 | |
| EAN / GTIN | 4045197679437 | |
| Manufacturer number | 203044 20 |
Application Table
P
250
P
200
P
180
P
160
M
70
K
120
Description
Version:
For roughing and finishing.
Up to 1.5×D into solid material at very high feed rates with smooth cutting action.
Up to 1.5×D into solid material at very high feed rates with smooth cutting action.
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide roughing end mill HPC 20 mm
on request
In stock
415 pieces in stock
US $ 258.22
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
227 pieces in stock
US $ 380.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
269 pieces in stock
US $ 331.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
US $ 331.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
US $ 330.12
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiXSi | TiAlN | TiAlN | TiAlN | AlCrN |
| Through-coolant | no | no | no | no | no |
| Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | solid carbide |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | ||
| Corner chamfer width at 45° | 0.4 mm | 0.1 mm | 0.5 mm | ||
| Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | ||