{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill HPC 4 mm
Article no.: 203041 4
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 38 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 11 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.08 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.02 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.025 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203041 4 | |
| EAN / GTIN | 4045197510549 | |
| Manufacturer number | 203041 4 |
Application Table
P
250
P
200
P
180
P
160
M
70
M
50
K
120
Description
Version:
For roughing and finishing.
Up to 1.5×D into solid material at very high feed rates with smooth cutting action.
Up to 1.5×D into solid material at very high feed rates with smooth cutting action.
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 203035.
Recommended successor product is No. 203035.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide roughing end mill HPC 4 mm
on request
In stock
200 pieces in stock
US $ 55.06
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
92 pieces in stock
US $ 58.94
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,461 pieces in stock
US $ 37.64
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
248 pieces in stock
US $ 48.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
230 pieces in stock
US $ 55.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
US $ 50.26
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 57 | 57 | 57 | 57 | 57 | 57 |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Cutting edge ⌀ DC | 4 | 4 | 4 | 4 | 4 | 4 |
| Type | N | N | N | N | N | N |
| Feed fz for side milling in steel < 900 N/mm2 | 0.025 | 0.024 | 0.025 | 0.025 | 0.024 | 0.055 |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.028 |
| No. of teeth Z | 4 | 3 | 4 | 4 | 3 | 4 |