{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter with internal coolant supply HPC 6 mm
Article no.: 203017 6
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiSi | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 35 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Flute length Lc | 13 mm | |
| Overhang length L1 incl. recess | 19 mm | |
| Recess ⌀ D1 | 5.8 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in stainless steel > 900 N/mm2 | 0.025 mm | |
| Feed fz for side milling in INOX > 900 N/mm2 | 0.03 mm | |
| Colour ring | blue | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203017 6 | |
| EAN / GTIN | 4045197591524 | |
| Manufacturer number | 203017 6 |
Application Table
P
240
P
220
P
180
P
180
P
150
H
115
H
80
M
90
M
80
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter with internal coolant supply HPC 6 mm
on request
In stock
39 pieces in stock
US $ 99.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
US $ 105.09
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
66 pieces in stock
US $ 98.14
plus VAT at the current rate
Prices plus delivery costs
|
|
| Standard | DIN 6527 | DIN 6527 | DIN 6527 |
| Helix angle | 35 | 38 | 35 |
| Helix angle characteristic | unequal spacing | unequal spacing | unequal spacing |
| Type | N | N | N |
| Corner chamfer width at 45° | 0.1 | 0.1 | 0.1 |
| Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing |
| Type of product | End / face mill | End / face mill | End / face mill |