{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 3 mm
Article no.: 202640 3
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 12 mm | |
| Overhang length L1 incl. recess | 17 mm | |
| Recess ⌀ D1 | 2.8 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.04 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.01 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.011 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202640 3 | |
| EAN / GTIN | 4045197117571 | |
| Manufacturer number | 202640 3 |
Application Table
N
140
N
105
P
70
P
60
P
55
P
35
P
30
H
25
M
40
M
30
K
55
Description
Version:
Double relief ground side clearance angle.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter 3 mm
on request
In stock
383 pieces in stock
US $ 21.37
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
152 pieces in stock
US $ 36.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
582 pieces in stock
US $ 17.86
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 38 | 75 | 45 |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | HB with h6 |
| Cutting edge ⌀ DC | 3 | 3 | 3 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Shank ⌀ Ds | 3 | 3 | 6 |
| Type of product | End / face mill | End / face mill | End / face mill |