{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 12 mm
Article no.: 202556 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.3×D for side milling; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 66 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank form | HB | |
| Corner chamfer width at 45° | 0.13 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.06 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.08 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202556 12 | |
| EAN / GTIN | 4067263120650 | |
| Manufacturer number | 202556 12 |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
P
60
H
35
M
80
M
60
K
90
Description
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter 12 mm
on request
In stock
45 pieces in stock
US $ 113.31
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
US $ 73.74
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
68 pieces in stock
US $ 66.49
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | green |
| Through-coolant | no | no | no |
| Cutting edge ⌀ DC | 12 | 12 | 12 |
| Flute length Lc | 16 | 16 | 16 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 0.13 | 0.05 | 0.05 |