{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Titan solid carbide mini milling cutter HPC 6 mm
Article no.: 202287 6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Series | Master Titan | |
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 10 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner rounding rv | 0.04 mm | |
| Feed fz for side milling in titanium > 850 N/mm2 | 0.03 mm | |
| Colour ring | pink | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202287 6 | |
| EAN / GTIN | 4062406270971 | |
| Manufacturer number | 202287 6 |
Application Table
S
60
Description
Version:
Extra short cutter for maximum stability. Shank length to DIN for improved support of the tool in the holder. This significantly increases the tool life.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Attractively priced and extra stable version for high-power machining of titanium.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Attractively priced and extra stable version for high-power machining of titanium.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Master Titan solid carbide mini milling cutter HPC 6 mm
on request
In stock
312 pieces in stock
US $ 34.29
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
87 pieces in stock
US $ 73.29
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
111 pieces in stock
US $ 42.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
147 pieces in stock
US $ 51.26
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | pink | pink | yellow | yellow |
| Standard | Manufacturer’s standard | DIN 6527 | DIN 6527 | Manufacturer’s standard |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Cutting edge ⌀ DC | 6 | 6 | 6 | 6 |
| Flute length Lc | 10 | 13 | 13 | 18 |
| Machining strategy | HPC | HPC ;TPC | HPC | HPC |
| Corner rounding rv | 0.04 | 0.1 | 0.2 | 0.2 |