{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC 4 mm
Article no.: 202247 4
Article code:
- Snijmateriaal: VHM
- Norm: Fabrieksnorm
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | ongecoat | |
| Snijmateriaal | VHM | |
| Norm | Fabrieksnorm | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Spiraalhoekeigenschap | ongelijk | |
| Direction of infeed | horizontal, oblique and vertical | |
| Ingrijpingsbreedte ae bij freesoperatie | Volle groef snijdiepte 1×D; 0,3×D bij kanten | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Inwendige koeling | nee | |
| Verspaningsstrategie | MTC | |
| Flute length Lc | 6.5 mm | |
| Overhang length L1 incl. recess | 24 mm | |
| Recess ⌀ D1 | 3.7 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.015 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.02 mm | |
| Gekleurde ring | geel | |
| Producttype | Hoekfrezen |
Identification numbers & Classifications
| Article number | 202247 4 | |
| EAN / GTIN | 4045197571021 | |
| Manufacturer number | 202247 4 |
Application Table
N
130
N
100
N
85
N
140
N
100
N
110
N
100
N
85
N
100
N
80
N
100
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.