{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill DIN 6535 HA 3 mm
Article no.: 202170 3
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 5 mm | |
| Overhang length L1 incl. recess | 12 mm | |
| Recess ⌀ D1 | 2.9 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.01 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.011 mm | |
| Correction factor for vc | 1.25 | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202170 3 | |
| EAN / GTIN | 4045197454652 | |
| Manufacturer number | 202170 3 |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
P
60
H
35
M
80
M
60
K
90
Description
Version:
Eccentric relief ground.
Dimensions similar to DIN 6527.
Tolerance: Size nominal ⌀ DC = e8.
Dimensions similar to DIN 6527.
Tolerance: Size nominal ⌀ DC = e8.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide slot drill DIN 6535 HA 3 mm
on request
In stock
65 pieces in stock
US $ 34.84
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
223 pieces in stock
US $ 20.10
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without |
| Overall length L | 50 | 57 |
| Through-coolant | no | no |
| Shank | DIN 6535 HA to h6 | DIN 6535 HB to h6 |
| Tool material | Solid carbide | Solid carbide |
| Helix angle | 45 | 45 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical |