{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill DIN 6535 HB 16 mm
Article no.: 201200 16
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h10
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 82 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.065 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201200 16 | |
| EAN / GTIN | 4045197112293 | |
| Manufacturer number | 201200 16 |
Application Table
N
180
N
140
N
105
N
180
N
130
N
150
N
130
N
110
N
180
N
140
N
180
Description
Version:
Stronger cutting edges.
Dimensions similar to DIN 6527.
Dimensions similar to DIN 6527.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide slot drill DIN 6535 HB 16 mm
on request
In stock
31 pieces in stock
US $ 78.37
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
68 pieces in stock
US $ 124.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
67 pieces in stock
US $ 199.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
244 pieces in stock
US $ 222.76
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.5×D for side milling |
| Overall length L | 82 | 92 | 92 | 92 |
| Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
| Flute length Lc | 22 | 32 | 36 | 36 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Corner chamfer width at 45° | 0.1 | 0.1 | 0.2 | 0.2 |
| Shank ⌀ Ds | 16 | 16 | 16 | 16 |