{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Mini milling cutter HSS-PM 9,5 mm
Article no.: 191380 9,5
Article code:
- Tool material: HSS PM
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 9.5 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Flute length Lc | 11 mm | |
| Overall length L | 48 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.018 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191380 9,5 | |
| EAN / GTIN | 4045197102409 | |
| Manufacturer number | 191380 9,5 |
Application Table
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
23
M
18
N
110
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground. Shank similar to DIN 1835 B with shank tolerance h6. General-purpose cutting edge geometry. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
For the most demanding metal removal rates.
Eccentric relief ground. Shank similar to DIN 1835 B with shank tolerance h6. General-purpose cutting edge geometry. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
For the most demanding metal removal rates.
Note:
Save the regrinding costs: it is cheaper to use a mini slot drill to the limit of wear and throw it away, than to regrind it.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Mini milling cutter HSS-PM 9,5 mm
on request
In stock
103 pieces in stock
US $ 34.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
148 pieces in stock
US $ 19.22
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | uncoated |
| Corner chamfer angle | 90 | 90 |
| Colour ring | without | without |
| Overall length L | 48 | 69 |
| Standard | Manufacturer’s standard | DIN 844 B |
| Type | N | N |
| Shank ⌀ Ds | 10 | 10 |