{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide-tipped circular saw blade Rake angle negative 300X30F mm
Article no.: 179700 300X30F
Article code:
- Tool material: Carbide
- Components: Carbide
Product details
Technical Data
| ⌀ | 300 mm | |
| Thickness | 3.2 mm | |
| Tool material | Carbide | |
| Bore ⌀ | 30 mm | |
| No. of teeth Z | 96 | |
| Pitch t | 9.8 mm | |
| Number of drive holes | 2;2 | |
| Drive hole ⌀ | 7;11 mm | |
| Drive hole pitch circle | 42;63 mm | |
| suitable for saw makes | Kaltenbach | |
| Components | Carbide | |
| Through-coolant | no | |
| Type of product | Circular saw blade |
Identification numbers & Classifications
| Article number | 179700 300X30F | |
| EAN / GTIN | 4045197096159 | |
| Manufacturer number | 179700 300X30F |
Application Table
N
850
N
650
N
450
Description
Version:
High performance toothing with high teeth and lower finishing teeth. The trapezoidal carbide tips cut easily and generate clean cut surfaces.
Advantage:
Particularly suitable for hard anodised profile material.
Application:
On high-speed machines.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Negative rake angle 6° for use on machines with oscillating saw blade infeed from above. Advantageous for thin profiles.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Negative rake angle 6° for use on machines with oscillating saw blade infeed from above. Advantageous for thin profiles.
Note:
- Recommended cutting speed: 40 − 80 m/s, for harder materials such as alloys, brass, or bronze it is preferable to use the lowest recommended speed.
- Pay special attention to maintaining an even feed rate; this prevents damage.
- Additional versions on request.
- Further circular saw blades can be found in catalogue volume 2.