{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Countersink, form D 60° 63 mm
Article no.: 150860 63
Article code:
- Countersink tip angle: 60
- Tool material: HSS
- Number of cutting edges Z: 3
- Standard: DIN 334
- Shank: Morse taper
Product details
Technical Data
| External ⌀ | 63 mm | |
| Coating | uncoated | |
| Countersink tip angle | 60 degrees | |
| Tool material | HSS | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 334 | |
| Shank | Morse taper | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 20 mm | |
| Overall length L | 190 mm | |
| Morse taper MT | 4 | |
| Feed f in steel < 500 N/mm2 | 0.35 mm/rev. | |
| Colour ring | without | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150860 63 | |
| EAN / GTIN | 4045197087447 | |
| Manufacturer number | 150860 63 |
Application Table
N
33
P
28
P
27
N
65
Description
Version:
The chip flutes are ground from solid up to size 31.5. Countersink point and circumference are relief ground and cut easily. This results in easy and chatter-free cutting for deep countersinking, as well as for deburring or countersinking.
Application:
For chatter-free countersinking and deburring.
Especially suitable for chamfering tapped holes and for countersinking in jig and tool making.
Especially suitable for chamfering tapped holes and for countersinking in jig and tool making.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Countersink, form D 60° 63 mm
on request
In stock
9 pieces in stock
US $ 309.23
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
US $ 264.67
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
87 pieces in stock
US $ 185.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
US $ 387.85
plus VAT at the current rate
Prices plus delivery costs
|
|
| External ⌀ | 63 | 63 | 63 | 63 |
| Coating | uncoated | uncoated | uncoated | TiN |
| Overall length L | 190 | 180 | 180 | 180 |
| Through-coolant | no | no | no | no |
| smallest countersink ⌀ for holes from | 20 | 16 | 16 | 16 |
| Feed f in steel < 500 N/mm2 | 0.35 | 0.35 | 0.35 | 0.35 |
| Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |