{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Single tooth thread mill 2×D M1,8
Article no.: 139610 M1,8
Article code:
- Thread type: M; M-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA with h6
Product details
Technical Data
| Thread size | M1.8 | |
| Coating | TiAlN | |
| Thread type | M; M-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA with h6 | |
| Thread pitch | 0.35 mm | |
| Nominal ⌀ DC | 1.35 mm | |
| maximum insertion depth LC | 4 mm | |
| Shank length Ls | 18 mm | |
| Overhang L1 | 4 mm | |
| Overall length L | 32 mm | |
| Shank ⌀ Ds | 3 mm | |
| Through-coolant | no | |
| No. of teeth Z | 4 | |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
| Feed fz in steel < 1400 N/mm2 | 0.01 mm | |
| Feed fz in CRP | 0.02 mm | |
| Shank tolerance | h6 | |
| Number of clamping slots | 4 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread depth | 3.6 mm | |
| Type of product | thread milling cutter |
Identification numbers & Classifications
| Article number | 139610 M1,8 | |
| EAN / GTIN | 4045197533883 | |
| Manufacturer number | 139610 M1,8 |
Application Table
N
300
N
300
N
200
P
300
P
250
P
200
P
100
P
80
H
60
H
40
H
30
M
100
M
80
S
60
N
100
N
100
N
150
Description
Version:
Corrected thread profile for milling exact internal threads (ensure stable clamping conditions). Very sturdy single-tooth thread mill, highly suitable especially for GRP, CRP, and graphite. Also suitable for Ti-based and Ni-based alloys and hardened steels up to 63 HRC.
Advantage:
Significantly less radial pressure than with multi-tooth thread mills.
Note:
Single-tooth thread mill exclusively for milling internal threads. The tapping hole (and where necessary the countersinking) has to be prepared beforehand!