Please enter all required fields.

GARANT Master Steel SPEED solid carbide drill, Weldon shank DIN 6535 HB 13,2 mm

Article no.: 123226 13,2

plus VAT at the current rate Prices plus delivery costs

⌀ D_C h7 (mm):

Quantity

on request

In stock

4 pieces in stock

Tool material: Solid carbide
Standard: Manufacturer’s standard
Version: 12×D
Tolerance nominal ⌀: h7
Number of cutting edges Z: 2

All product details

Product details

Technical Data

Series		Master Steel
Nominal ⌀ D_C		13.2 mm
Coating		TiAlN
Tool material		Solid carbide
Standard		Manufacturer’s standard
Version		12×D
Tolerance nominal ⌀		h7
Number of cutting edges Z		2
Point angle		135 degrees
recommended maximum drilling depth L₂		162.2 mm
Shank		DIN 6535 HB to h6
Through-coolant		yes, to 25 bar
Machining strategy		HPC
Pilot drill required		yes, pilot drill
Semi-Standard		yes
Flute length L_c		182 mm
Overall length L		230 mm
Shank ⌀ D_s		14 mm
Feed f in steel < 1100 N/mm²		0.23 mm/rev.
Colour ring		green
Type of product		Jobber drill

Identification numbers & Classifications

Article number		123226 13,2
EAN / GTIN		4045197848185
Manufacturer number		123226 13,2

Application Table

160

125

115

105

100

Description

Version:

Developed for use with very high cutting speeds. Outstandingly suitable for machines with low installed power and high speeds.

Clear reduction in cutting forces due to special cutter geometry.
Coating for best wear resistance even at high process temperatures.
Polished flutes for good chip clearance.

A slim chisel point and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy. Optimised micro-geometry for increased working life and performance capability.

Note:

Flute length L_C = L₂ + 1.5 × D_C.
For process reliability when using the 12×D deep-hole drill, an initial centre drilling with No. 121068 – 121130 or 3×D pilot drilling operation with No. 122736 is necessary.