{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide HPC drill, plain shank DIN 6535 HB, TiAlN, ⌀ DC p6: 9mm
Article no.: 122738 9
Article code:
Click to enlarge image
Weldon shank DIN 6535 HB
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: p6
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 9 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | p6 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 47.5 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 61 mm | |
| Overall length L | 103 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank tolerance | h6 | |
| Feed f in steel < 1100 N/mm2 | 0.27 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122738 9 | |
| EAN / GTIN | 4045197567741 | |
| Manufacturer number | 122738 9 |
Application Table
P
170
P
130
P
120
P
110
P
65
M
75
M
70
K
95
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole, thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from ⌀ 3.8 mm. Up to 3.7 mm ⌀ with 2 internal cooling channels. With 140° point angle and special j6 cutting edge tolerance for optimum generation of a pilot hole.
Note:
Flute length LC = L2 + 1.5 × DC.
For deep-hole drilling deeper than 12×D a pilot hole is recommended, and for deep-hole drilling from 20×D to 30×D it is essential.
The generation of a pilot hole always improves process reliability.
For deep-hole drilling deeper than 12×D a pilot hole is recommended, and for deep-hole drilling from 20×D to 30×D it is essential.
The generation of a pilot hole always improves process reliability.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
Solid carbide HPC drill, plain shank DIN 6535 HB, TiAlN, ⌀ DC p6: 9mm
on request
In stock
27 pieces in stock
US $ 158.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
303 pieces in stock
US $ 89.64
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
US $ 144.42
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
642 pieces in stock
US $ 69.38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
US $ 139.88
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 |
| Colour ring | green | green | green | green | red |
| Through-coolant | yes, with 25 bar | yes, with 25 bar | Yes, with 25 bar | yes, to 25 bar | yes, with 25 bar |
| Standard | DIN 6537 | DIN 6537 | DIN 6537 | DIN 6537 | DIN 6537 |
| Point angle | 140 degrees | 140 degrees | 135 degrees | 140 degrees | 140 degrees |
| Tolerance nominal ⌀ | p6 | h7 | h7 | h7 | h7 |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |