{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide HPC drill, plain shank DIN 6535 HA 2,9 mm
Article no.: 122680 2,9
Article code:
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: m7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 2.9 mm | |
| Coating | TiAlSiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 17.65 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 22 mm | |
| Overall length L | 55 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed f in titanium > 850 N/mm2 | 0.03 mm/rev. | |
| Colour ring | pink | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122680 2,9 | |
| EAN / GTIN | 4067263000853 | |
| Manufacturer number | 122680 2,9 |
Application Table
S
45
S
35
Description
Version:
Specially for machining titanium-based and nickel-based alloys. With wear-resistant, ultra-smooth TiAlSiN high-performance coating for a long tool life combined with optimum bore quality and very low burr formation.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide HPC drill, plain shank DIN 6535 HA 2,9 mm
on request
In stock
5 pieces in stock
US $ 98.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
US $ 99.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
92 pieces in stock
US $ 54.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
US $ 103.26
plus VAT at the current rate
Prices plus delivery costs
|
|
| Version | 6×D | 6×D | 6×D | 6×D |
| Overall length L | 55 | 57 | 55 | 57 |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Point angle | 140 | 140 | 140 | 140 |
| Tolerance nominal ⌀ | m7 | m6 | h7 | h7 |
| Flute length Lc | 22 | 21 | 23 | 21 |
| Shank ⌀ Ds | 4 | 4 | 4 | 4 |