{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide HPC drill Weldon shank DIN 6535 HB 4,5 mm
Article no.: 122608 4,5
Article code:
Click to enlarge image
Weldon shank DIN 6535 HB
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Type: W
- Tolerance nominal ⌀: p6
Product details
Technical Data
| Nominal ⌀ DC | 4.5 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Type | W | |
| Tolerance nominal ⌀ | p6 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 29.3 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 36 mm | |
| Overall length L | 74 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank tolerance | h6 | |
| Feed f in aluminium short-chipping | 0.28 mm/rev. | |
| Colour ring | yellow | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122608 4,5 | |
| EAN / GTIN | 4045197568779 | |
| Manufacturer number | 122608 4,5 |
Application Table
N
360
N
400
N
350
N
150
N
120
N
90
N
80
N
70
N
80
N
160
N
200
N
80
N
80
Description
Version:
Spiral fluted, with 6 guide chamfers and internal cooling channels.
New generation of high performance pilot drills in the HPC range.
With 140° point angle and special p6 cutting edge tolerance for optimum generation of a pilot hole. High alignment accuracy and roundness of the pilot hole.
New generation of high performance pilot drills in the HPC range.
With 140° point angle and special p6 cutting edge tolerance for optimum generation of a pilot hole. High alignment accuracy and roundness of the pilot hole.
Note:
Flute length LC = L2 + 1.5 × DC.
For deep-hole drilling deeper than 16×D a pilot hole is recommended, and for deep-hole drilling from 20×D to 30×D it is essential. The generation of a pilot hole always improves process reliability.
For deep-hole drilling deeper than 16×D a pilot hole is recommended, and for deep-hole drilling from 20×D to 30×D it is essential. The generation of a pilot hole always improves process reliability.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
Solid carbide HPC drill Weldon shank DIN 6535 HB 4,5 mm
on request
In stock
41 pieces in stock
US $ 109.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
126 pieces in stock
US $ 99.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
US $ 117.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
422 pieces in stock
US $ 53.14
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
US $ 103.26
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | DLC | TiAlN | TiAlN | TiAlN | TiAlN |
| Colour ring | yellow | blue | green | green | red |
| Through-coolant | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar | yes, to 25 bar | yes, with 25 bar |
| Standard | DIN 6537 | DIN 6537 | DIN 6537 | DIN 6537 | DIN 6537 |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Machining strategy | HPC | HPC | HPC | HPC | HPC |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |