{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel FEED solid carbide drill, Weldon shank DIN 6535 HB 11/32
Article no.: 122436 11/32
Article code:
- Tool material: solid carbide
- Standard: DIN 6537 K
- Version: 4×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 3
Product details
Technical Data
| Series | Master Steel | |
| Inch nominal ⌀ corresponds to | 8.73 mm | |
| Coating | TiAlN | |
| Tool material | solid carbide | |
| Standard | DIN 6537 K | |
| Version | 4×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 3 | |
| Point angle | 145 degrees | |
| recommended maximum drilling depth L2 | 33.905 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | Yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 47 mm | |
| Overall length L | 89 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed f in steel < 1100 N/mm2 | 0.44 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122436 11/32 | |
| EAN / GTIN | 4062406126933 | |
| Manufacturer number | 122436 11/32 |
Application Table
P
160
P
140
P
130
P
110
P
90
H
60
M
60
M
50
S
40
K
130
K
80
Description
Version:
3-flute drill, specially developed for use at very high feed rates. Outstandingly suitable for machines with high installed power and stable machining conditions.
The sector-leading technology of the chisel point guarantees optimum self-centring behaviour and permits spot drilling on irregular surfaces. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
- Special cutter geometry with stable cutting edges and large clearance at the centre enables very high feed rates.
- The patented tip is optimised for chip flow and generates low cutting pressure with good chip breakage.
- With a 145° point angle for low burrs on emerging from through holes.
The sector-leading technology of the chisel point guarantees optimum self-centring behaviour and permits spot drilling on irregular surfaces. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
Note:
Flute length LC = L2 + 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
GARANT Master Steel FEED solid carbide drill, Weldon shank DIN 6535 HB 11/32
on request
In stock
12 pieces in stock
US $ 160.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
US $ 160.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
US $ 63.56
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
US $ 63.56
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
US $ 63.56
plus VAT at the current rate
Prices plus delivery costs
|
|
| Version | 4×D | 4×D | 4×D | 4×D | 4×D |
| Tool material | solid carbide | solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Tolerance nominal ⌀ | h7 | h7 | h7 | h7 | h7 |
| Machining strategy | HPC | HPC | HPC | HPC | HPC |
| Inch nominal ⌀ corresponds to | 8.73 mm | 8.73 mm | 8.73 mm | 8.73 mm | 8.73 mm |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
| recommended maximum drilling depth L2 | 33.905 mm | 34 mm | 34 mm | 33.905 mm | 33.905 mm |