{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 14.25 mm | |
Coating | uncoated | |
Tool material | HSS E | |
Standard | DIN 345 | |
Type | INOX | |
Tolerance nominal ⌀ | h8 | |
Point angle | 135 degrees | |
Helix angle | 35-40 degrees | |
Shank | Morse taper | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
recommended maximum drilling depth L2 | 92.6 mm | |
Flute length Lc | 114 mm | |
Overall length L | 212 mm | |
Morse taper MT size | 2 | |
Feed f in steel < 750 N/mm2 | 0.16 mm/rev. | |
Colour ring | without | |
Type of product | Jobber drill |
Article number | 116360 14,25 | |
EAN / GTIN | 4045197031877 | |
Manufacturer number | 116360 14,25 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Jobber drill HSS-E VA, uncoated, ⌀ DC h8: 14,25mm
on request
In stock
10 pieces in stock
US $ 106.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
109 pieces in stock
US $ 24.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
45 pieces in stock
US $ 51.04
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | uncoated | uncoated |
Colour ring | without | without | without |
Through-coolant | no | no | no |
Tool material | HSS E | HSS | HSS |
Flute length Lc | 114 mm | 114 mm | 114 mm |
Feed f in steel < 750 N/mm2 | 0.16 mm/rev. | 0.16 mm/rev. | 0.16 mm/rev. |
recommended maximum drilling depth L2 | 92.6 mm | 92.6 mm | 92.6 mm |