{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill long HSS N 0,8 mm
Article no.: 116000 0,8
Article code:
- Tool material: HSS
- Standard: DIN 340
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
Product details
Technical Data
| Nominal ⌀ DC | 0.8 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 340 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 23.8 mm | |
| Flute length Lc | 25 mm | |
| Overall length L | 46 mm | |
| Shank ⌀ Ds | 0.8 mm | |
| Feed f in steel < 750 N/mm2 | 0.02 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116000 0,8 | |
| EAN / GTIN | 4045197462718 | |
| Manufacturer number | 116000 0,8 |
Application Table
N
64
N
52
N
40
P
40
P
30
P
25
K
25
Description
Version:
Vaporised from 2.4 mm. Particularly for deep hole drilling (for deep holes, repeated chip evacuation is necessary).
With point geometry shape A from size 4 mm.
With point geometry shape A from size 4 mm.
Advantage:
Especially suitable for long reach purposes. (When used to drill deep holes, low feed rates and frequent drill pecks are necessary).
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Jobber drill long HSS N 0,8 mm
on request
In stock
1,695 pieces in stock
from
1
Pieces
US $ 7.83
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
US $ 6.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2,231 pieces in stock
from
1
Pieces
US $ 3.77
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
US $ 3.15
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without |
| Standard | DIN 340 | DIN 338 |
| Tolerance nominal ⌀ | h8 | h8 |
| Type | N | N |
| Flute length Lc | 25 | 10 |
| Shank ⌀ Ds | 0.8 | 0.8 |
| Feed f in steel < 750 N/mm2 | 0.02 | 0.03 |