{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Coating | uncoated | |
Tool material | HSS | |
Standard | DIN 333 | |
Type | A | |
Tolerance nominal ⌀ | k12 | |
Countersink angle | 60 degrees | |
Cutting direction | right-hand | |
Shank | Parallel shank to h7 | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
Nominal ⌀ DC | 5 mm | |
for workpiece ⌀ | 63 − 100 mm | |
Shank ⌀ Ds | 12.5 mm | |
Shank tolerance | h7 | |
Overall length L | 63 mm | |
Feed f in steel < 900 N/mm2 | 0.04 mm/rev. | |
Colour ring | without | |
Type of product | Centre drill |
Article number | 111000 5 | |
EAN / GTIN | 4045197000187 | |
Manufacturer number | 111000 5 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
Centre drill A 5 mm
on request
In stock
928 pieces in stock
US $ 14.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,557 pieces in stock
US $ 12.82
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
667 pieces in stock
US $ 21.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
US $ 22.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
104 pieces in stock
US $ 39.21
plus VAT at the current rate
Prices plus delivery costs
|
|
Overall length L | 63 | 63 | 63 | 63 | 63 |
Through-coolant | no | no | no | no | no |
Nominal ⌀ DC | 5 | 5 | 5 | 5 | 5 |
Standard | DIN 333 | DIN 333 | DIN 333 | DIN 333 | DIN 333 |
Shank tolerance | h7 | h7 | h7 | h7 | h7 |
Feed f in steel < 900 N/mm2 | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 |
Shank ⌀ Ds | 12.5 | 12.5 | 12 | 12.5 | 12.5 |