{{ name }}
Č. pol. {{ combinedCodeWithHighlight }}
Kód položky:
EAN/GTIN:
Číslo výrobcu:
- Setting angle κ: 93
- Milling application: Circular milling; Ramping
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Podrobnosti o výrobku
Technické údaje
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with threaded shank | |
| Setting angle κ | 93 degrees | |
| Milling application | Circular milling; Ramping | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 23 mm | |
| ⌀ D1 h6 | 12.5 mm | |
| ⌀ D2 | 20.7 mm | |
| Overall length Ltot | 35 mm | |
| Mounting thread M | M12 | |
| Circular interpolation milling ⌀ Dmin | 48 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Circular interpolation milling ap | 3.5 mm | |
| Ramping angle αmax | 4.01 degrees | |
| Ramping length L for αmax | 21.4 mm | |
| suitable indexable insert | VDGT 11T2.. | |
| Pack of insert screws | 219801 (7IP; 0.9 Nm) | |
| Type of product | Plunge mill |
Identifikačné čísla a klasifikácie
| Číslo položky | 211852 25/3 | |
| EAN/GTIN | 4045197648594 | |
| Číslo výrobcu | 211852 25/3 |
Popis
Version:
Greater tool stiffness by elimination of twist between indexable insert and insert seat.
Can be extended as required using the threaded connection.
Can be extended as required using the threaded connection.
Application:
To prevent chips jamming, especially when milling deep pockets.