{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
Diamantna delavniška pila ravna, tupa 100 mm D251 (srednja) za trde materiale GRP/CFRP
Št. art.: 4007220805961
Koda izdelka:
Upoštevajte daljši čas dostave in omejeno število nasvetov:
Ta izdelek za vas naročimo neposredno pri proizvajalcu, saj ni del naše glavne ponudbe in ga zato nimamo na zalogi.
InfoPodrobnosti o izdelku
Tehnični podatki
| Vrsta izdelka | Delavniške pile |
Identifikacijske številke in klasifikacije
| Številka izdelka | 4007220805961 | |
| EAN/GTIN | 4007220805961 | |
| Številka proizvajalca | 15400251 | |
| L-število | L51060 297 |
Opis
Opis:
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on. Diamond files and sheets are also used for processing hardened steel. The working temperatures are so low that no chemical wear occurs. This allows the higher hardness of the diamond grain to be exploited for a longer tool life. Diamond machinist's files are used in many industries, such as the manufacturing of large tools. They are supplied with ergonomic file handles. Diamond machinist's files are supplied with ergonomic file handles. Grit size D 251 is also suitable for work on fibre-reinforced plastics (GRP/CRP).
Oznaka:
- Shape: Hand
- Width, metric: 10 mm
- Grit size: D 251
- Height: 3.2 mm
- Length, coating: 85 mm
- Length, total: 100 mm
Upotreba:
- Recommendations for use: Apply only slight pressure to the file, especially in workpiece edge areas. Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often it will suffice to knock the file against a hard object. Avoid using grease!
- Applications: Deburring; Finishing; Leveling; Removing oxide layers; Surface work; Working on edges; Working on edges (chamfering, rounding)
- Drive types: Manual application
Materijal:
- Materials that can be worked:
- Abrasive materials
- Case-hardened steels
- Thermosetting plastics
- Ferrite (magnetic material)
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Glass
- Graphite and synthetic carbon
- Nickel or titanium-based superalloys
- Steel materials with a hardness > 54 HRC
- Technical ceramics
- Tool steels
- Tungsten carbide
- Materials that can be worked: Abrasive materials; Case-hardened steels; Thermosetting plastics; Ferrite (magnetic material); Fibre-reinforced thermosetting plastics (GRP, CRP); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide
Opseg isporuke:
- Customer-specific tool solutions are available on request.