{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
Na voljo alternativa:
-
Št. art.: 308605 40
- Pull stud standard: ISO 7388-3
Podrobnosti o izdelku
Tehnični podatki
| suitable for steep tapers | 40 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 19 mm | |
| Overall length L | 54 mm | |
| L1 | 26 mm | |
| Thread M | M16 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identifikacijske številke in klasifikacije
| Številka izdelka | 308600 40 | |
| EAN/GTIN | 4045197150905 | |
| Številka proizvajalca | 308600 40 |
Opis
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
ISO 7388-3 meets the old standard DIN 69872.
Prenosi in dokumenti
Primerjajte s podobnimi izdelki
Tega članka |
Priporočilo: |
||
|---|---|---|---|
Pull stud Form A 40
po ponudbi
Na zalogi
6.473 kosov na zalogi
£9.28
plus DDV po trenutni stopnji
in strošek dostave
|
|||
| Collar ⌀ D | 23 | 23 | 23 |
| Overall length L | 54 | 54 | 54 |
| maximum tightening torque | 50 | 50 | 50 |
| suitable for steep tapers | 40 | 40 | 40 |
| Width across flats | 19 | 19 | 19 |
| Angle A | 15 | 15 | 15 |
| Type of product | Pull Stud | Pull Stud | Pull Stud |