{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide-tipped multi-purpose drill, 1/4 inch (E 6.3) 3 mm
Article no.: 787001 3
Article code:
- Tool material: Carbide
- Use with impact / without impact: not for impact drilling
- Bit hexagon shank: E 6.3
Product details
Technical Data
| Drill ⌀ | 3 mm | |
| Tool material | Carbide | |
| Use with impact / without impact | not for impact drilling | |
| Bit hexagon shank | E 6.3 | |
| Flute length | 45 mm | |
| overall length | 90 mm | |
| Type of product | Multi-purpose drill |
Identification numbers & Classifications
| Article number | 787001 3 | |
| EAN / GTIN | 4058546287191 | |
| Manufacturer number | 4932471091 |
Description
Version:
Carbide tip with ground point and multi-purpose cutter angle. The centrally ground chisel edge ensures accurate spot drilling also on hard surfaces. Shank of annealed special steel.
Application:
For drilling various materials, in a single operation:
- Bricks, porous concrete, lightweight materials, plastics.
- Tiles, ceramics, marble, glass
- Reinforcing bars in concrete.
Note:
- Caution: only for rotary use (without hammer action!)
- Faster drilling and more holes per battery charge than with hammer drill bits.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Carbide-tipped multi-purpose drill, 1/4 inch (E 6.3) 3 mm |
on request
In stock
165 pieces in stock
NOK 42,91
plus VAT at the current rate
Prices plus delivery costs
|
|
| Borr-⌀ | 3 | 3 |
| totallängd | 90 | 60 |
| Skaft | Cylindriskt skaft | |
| Skärmaterial | Carbide | VHM |
| spirallängd | 45 | 30 |
| Användning med slag/utan slag | not for impact drilling | inte slagborrning |
| Produktslag | Multi-purpose drill | Universalborr |