{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
BIT ratchet socket plug-in head 1/4 in
Article no.: 657940 1/4
Article code:
- Exchangeable tool: Plug-in head
Product details
Technical Data
| Exchangeable tool | Plug-in head | |
| Width b | 22 mm | |
| Height h | 13.6 mm | |
| Series | 725B | |
| Long-term rated loading | 40 Nm | |
| No. of teeth | 22 | |
| Pitch S | 17.5 mm | |
| Plug-in shank | 9×12 mm | |
| Bit-holder | 1/4 in | |
| Material | Chrome alloy steel | |
| Ratchet reversible | yes | |
| Tool with ratchet function | yes | |
| Type of product | BIT ratchet socket plug-in head |
Identification numbers & Classifications
| Article number | 657940 1/4 | |
| EAN / GTIN | 4018754140794 | |
| Manufacturer number | 58255004 |
Description
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Ratchet reversible for clockwise / anticlockwise tightening.
Ratchet reversible for clockwise / anticlockwise tightening.
Application:
To take bits with hexagon shank to DIN ISO 1173 C 6.3 and E 6.3 (1/4 inch).
Material:
Chrome alloy steel, non-flaking, chrome-plated over nickel.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
The rated load on this plug-in head is limited to the corresponding jaw width, and may be less than that of the torque wrench.
The rated load on this plug-in head is limited to the corresponding jaw width, and may be less than that of the torque wrench.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
BIT ratchet socket plug-in head 1/4 in |
||
| Bit-holder | 1/4 | 1/4 |
| Long-term rated loading | 40 | 15 |
| Height h | 13.6 | 12.4 |
| Pitch S | 17.5 | 17.5 |
| No. of teeth | 22 | 60 |
| Tool with ratchet function | yes | yes |
| Exchangeable tool | Plug-in head | Plug-in head |