{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Open ring plug-in head 1-14 mm
Article no.: 657910 1-14
Article code:
- Exchangeable tool: Plug-in head
Product details
Technical Data
| Exchangeable tool | Plug-in head | |
| Series | 733/10 | |
| Width b | 27 mm | |
| Height h | 13 mm | |
| Width across flats | 14 mm | |
| Pitch S | 17.5 mm | |
| Plug-in shank | 9×12 mm | |
| Material | Chrome alloy steel | |
| Surface | chrome plated (non-flaking) | |
| Ratchet function | no | |
| Type of product | Ring plug-in head |
Identification numbers & Classifications
| Article number | 657910 1-14 | |
| EAN / GTIN | 4018754034390 | |
| Manufacturer number | 58231014 |
Description
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Material:
Chrome alloy steel, non-flaking, chrome-plated over nickel.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
The rated load on this plug-in head is limited to the corresponding jaw width, and may be less than that of the torque wrench.
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Open ring plug-in head 1-14 mm |
||
| Height h | 13 | 13 |
| Surface | chrome plated (non-flaking) | chrome plated (non-flaking) |
| Ratchet function | no | no |
| Width across flats | 14 | 14 |
| Pitch S | 17.5 | 17.5 |
| Exchangeable tool | Plug-in head | Plug-in head |
| Type of product | Ring plug-in head | Ring plug-in head |