{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque wrench with setting scale 50 N·m
Article no.: 657235 50
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
For a description of the legend, see description text.
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±3
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 50 Nm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±3 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 260 mm | |
| Torque range | 10 Nm - 50 Nm | |
| Scale graduation, 1 graduation = | 0.5 Nm | |
| Weight | 400 g | |
| Square drive | 3/8 in | |
| Display | analogue | |
| Release signalling | akustisk; haptisk | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Reversible reading | Nm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Lever length including factory calibration reference dimension [l3] | 180 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 657235 50 | |
| EAN / GTIN | 4560138448076 | |
| Manufacturer number | QL50N |
Description
Version:
Torque wrench, adjustable using micrometer scale, with protection against accidental changes to the setting. With reversible ratchet head and square drive for sockets.
Units of measure: Nm.
Units of measure: Nm.
With synthetic resin handle.
Function:
On reaching the set torque value the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again.
Application:
For medium and large batch productions.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.