{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cubitron™ II fibre disc (CER) 982CX PRO 36
Article no.: 566465 36
Article code:
- Grinding medium code: Ceramic
- Iron, sulphur and chlorine constituents: < 0.1
- Bore ⌀: 22.23
- optimised for material: Steel; Cast iron
- maximum circumferential speed: 80
Product details
Technical Data
| Series | Cubitron™II | |
| Grinding media | Cubitron™ II | |
| Grinding medium code | Ceramic | |
| Grit | 36 | |
| Grinding media backing | Vulcanised fibre | |
| Iron, sulphur and chlorine constituents | < 0.1 % | |
| Disc ⌀ | 115 mm | |
| Bore ⌀ | 22.23 mm | |
| Manufacturer's designation | 982CX PRO | |
| optimised for material | Steel; Cast iron | |
| Propulsive equipment | Angle grinder | |
| maximum circumferential speed | 80 m/s | |
| Type of product | Fibre disc |
Identification numbers & Classifications
| Article number | 566465 36 | |
| EAN / GTIN | 638060833230 | |
| Manufacturer number | 7100242885 |
Application Table
Description
Version:
The precisely formed high-performance abrasive grit in 3M™ products consists of defined ceramic triangles optimally arranged on the grinding surface. Greatly increased removal rate with very long working life and even finish.
Extremely tear-resistant but very flexible vulcanised fibre. Bore diameter 22.23 mm and crossed slots.
High-performance fibre disc with improved precisely formed Cubitron™ II grit and a new design. For even more aggressive grinding performance and extended tool life compared to 982C.
Extremely tear-resistant but very flexible vulcanised fibre. Bore diameter 22.23 mm and crossed slots.
High-performance fibre disc with improved precisely formed Cubitron™ II grit and a new design. For even more aggressive grinding performance and extended tool life compared to 982C.
Application:
Limited to maximum 80 m/s circumferential speed with backing pads No. 566690 / 566692 on angle grinders. The quick-cutting abrasive grit permits comfortable and ergonomic working without the need to exert great pressure. At the same time, the high removal rate of 3M™ fibre discs makes them a real alternative to roughing discs and flap discs.
For machining steel.
For machining steel.