{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Tap extension with internal cooling 6
Article no.: 338450 6
Article code:
Product details
Technical Data
| for thread nominal ⌀ d1 DIN 371 | M8 | |
| for thread nominal ⌀ d1 DIN 374/376 | M11 | |
| for thread shank ⌀ d2 | 8 mm | |
| for square K1 | 6.2 mm | |
| for clamping length l1 | 30 mm | |
| Extension ⌀ D3 | 8 mm | |
| Extension ⌀ D4 | 13 mm | |
| Extension K2 | 6.2 mm | |
| Extension L2 | 60 mm | |
| Extension L3 | 130 mm | |
| Type of product | Extension |
Identification numbers & Classifications
| Article number | 338450 6 | |
| EAN / GTIN | 4045197603548 | |
| Manufacturer number | 338450 6 |
Description
Version:
- Long and extra long version.
- The front end of the extension acts as a collet. The collet is clamped to the tap by hand-tightening the knurled clamping nut.
- The drive torque is transmitted via the square drive.
- The rear part of the extension is to DIN, so that the extension can be mounted in quick-change tapping collets or ER tapping collets with a square drive.
With internal coolant supply
Application:
For tapping in confined places, such as recesses, offsets, sharp edges on jigs, extremely deep internal threads, or directly into casting walls.
Note:
Alternative hexagon collet for fixing the tap available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Tap extension with internal cooling 6 |
||||
| for thread nominal ⌀ d1 DIN 371 | M8 | M8 | M8 | M8 |
| for thread nominal ⌀ d1 DIN 374/376 | M11 | M11 | M11 | M11 |
| Extension ⌀ D3 | 8 mm | 8 mm | 8 mm | 12 mm |
| Extension K2 | 6.2 mm | 6.2 mm | 6.2 mm | 9 mm |
| Extension L2 | 60 mm | 60 mm | 60 mm | 45 mm |
| for thread shank ⌀ d2 | 8 mm | 8 mm | 8 mm | 8 mm |
| Type of product | Extension | Extension | Extension | Extension |