{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Base jaw set, 3 pieces, angled serration, for chuck type: 400
Article no.: 313200 400
Article code:
Product details
Technical Data
| for chuck type | 400 mm | |
| Length L | 160 mm | |
| Width B | 45 mm | |
| Slot width A | 30 mm | |
| Bore spacing b | 60 mm | |
| Tenon width D | 18 mm | |
| suitable for colour code | Röhm self-centring chucks and jaws; Schunk self-centring chucks and jaws | |
| Type of product | Self-centring chuck jaws |
Identification numbers & Classifications
| Article number | 313200 400 | |
| EAN / GTIN | 4019208023816 | |
| Manufacturer number | 094044 |
Description
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
To accept hard or soft top jaws. Fastening screws for top jaws are supplied.
To accept hard or soft top jaws. Fastening screws for top jaws are supplied.