{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | CNMG 120416 | |
Corner radius | 1.6 mm | |
Grade | CA6525 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | MS (brass) | |
Cutting depth ap | 0.7 mm - 4 mm | |
Feed f | 0.1 mm/rev. - 0.35 mm/rev. | |
Cutting speed vc main application | 60 m/min - 220 m/min | |
Number of changes/inserts | 4 | |
Finishing/roughing assignment | Semi-roughing | |
Type of product | Indexable insert for turning |
Article number | 250216 CA6525 | |
EAN / GTIN | 4960664471379 | |
Manufacturer number | TJV00924 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() CNMG 120416 CA6525 |
on request
In stock
448 pieces in stock
from
1
Pieces
10,68 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
8,90 €
plus VAT at the current rate
Prices plus delivery costs
|
||||
Number of changes/inserts | 4 | 4 | 4 | 4 | 4 |
Danga | TiCN | padengtas | |||
Finishing/roughing assignment | Semi-roughing | Skrubbearbejdning-sletbearbejdning | Semi-roughing | Rupusis apdirbimas | Pusiau glotnusis apdirbimas |
Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted | retai pertraukiamas | retai pertraukiamas |
Grade | CA6525 | HB7020 | HB7140-1 | HB7210-1 | HB7130-2 |
Chip breaker | MS (brass) | SM | VM | GM | VM |
Feed f | 0.1 mm/rev. - 0.35 mm/rev. | 0.2 mm/rev. - 0.5 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. | 0,3 mm/aps. - 0,7 mm/aps. | 0,1 mm/aps. - 0,4 mm/aps. |