{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC11T 100/9 mm
Article no.: 227310 100/9
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 9 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 10 mm | |
| Overall length Ltot | 55 mm | |
| Mounting bore ⌀ | 32 mm | |
| ⌀ D3 | 94 mm | |
| Circular interpolation milling ⌀ Dmin | 194 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Ramping angle αmax | 0.12 degrees | |
| Ramping length L for αmax | 93 mm | |
| suitable indexable insert | BD.. 11T3 | |
| Insert screw | 229708 (T8; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227310 100/9 | |
| EAN / GTIN | 4960664489336 | |
| Manufacturer number | THN03413 |
Description
Description:
MEC11T mill type with higher stability due to lower number of cutters than MECX. This enables higher feed rates per cutter.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Indexable milling cutter 90° MEC11T 100/9 mm |
||
| Overall length Ltot | 55 | 50 |
| suitable indexable insert | BD.. 11T3 | LO.. 130708 |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 100 | 100 |
| Setting angle κ | 90 | 90 |
| maximum cutting depth ap max | 10 | 12 |
| Type of product | End / face mill | End / face mill |