{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC11T 16/2 mm
Article no.: 227305 16/2
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 10 mm | |
| Overhang L1 | 25 mm | |
| Overall length Ltot | 68 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| ⌀ D3 | 10 mm | |
| Circular interpolation milling ⌀ Dmin | 26 mm | |
| Circular interpolation milling ⌀ Dmax | 30 mm | |
| Ramping angle αmax | 1.27 degrees | |
| Ramping length L for αmax | 9 mm | |
| suitable indexable insert | BD.. 11T3 | |
| Insert screw | 229708 (T8; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227305 16/2 | |
| EAN / GTIN | 4960664406517 | |
| Manufacturer number | THN63151 |
Description
Description:
MEC11T mill type with higher stability due to lower number of cutters than MECX. This enables higher feed rates per cutter.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable milling cutter 90° MEC11T 16/2 mm |
|||
| Number of cutting edges Z | 2 | 2 | 2 |
| Overhang L1 | 25 | 37 | 37 |
| Shank type | Weldon shank | Weldon shank | Weldon shank |
| Setting angle κ | 90 | 90 | 90 |
| Shank ⌀ Ds h6 | 16 | 16 | 16 |
| Circular interpolation milling ⌀ Dmin | 26 | 29 | 29 |
| Ramping length L for αmax | 9 | 10.85 | 10.85 |