{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 63 mm | |
Number of cutting edges Z | 5 | |
Shank type | with bore | |
Milling application | Circular milling; Plunging; Ramping | |
Through-coolant | yes | |
Machining strategy | HPC | |
⌀ D3 | 46 mm | |
maximum cutting depth ap max | 1.5 mm | |
maximum cutting depth ap max for LD geometry | 3.5 mm | |
Overall length Ltot | 50 mm | |
Mounting bore ⌀ | 22 mm | |
Circular interpolation milling ⌀ Dmin | 109 mm | |
Circular interpolation milling ⌀ Dmax | 124 mm | |
Ramping angle αmax | 0.45 degrees | |
Ramping length L for αmax | 45.4 mm | |
Indexable insert size | 10 | |
suitable indexable insert | SOMT.. | |
Insert screw | 229718 (15IP; 3.5 Nm) | |
Setting angle κ | 10 degrees | |
Fz Helix | 0.7 | |
Type of product | Copy mill |
Article number | 222065 63/5 | |
EAN / GTIN | 4960664707645 | |
Manufacturer number | THN07672 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() High feed rate milling cutter MFH Harrier 63/5 mm |
||||
Mounting bore ⌀ | 22 mm | 27 mm | 27 mm | 27 mm |
Setting angle κ | 10 degrees | 12 degrees | 11 degrees | 16 degrees |
Milling application | Circular milling; Plunging; Ramping | Circular milling; Ramping; Plunging | Circular milling; Ramping; Plunging | Plunging; Ramping; Plunging |
Overall length Ltot | 50 mm | 50 mm | 50 mm | 50 mm |
Circular interpolation milling ⌀ Dmax | 124 mm | 124 mm | 124 mm | 124 mm |
Ramping angle αmax | 0.45 degrees | 0.41 degrees | 1.06 degrees | 1.04 degrees |
Ramping length L for αmax | 45.4 mm | 41.5 mm | 43.34 mm | 44.07 mm |