{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier 28/2 mm
Article no.: 222060 28/2
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Machining strategy: HPC
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 28 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Milling application | Circular milling; Plunging; Ramping | |
| Machining strategy | HPC | |
| Through-coolant | yes | |
| ⌀ D3 | 11 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overall length Ltot | 35 mm | |
| Mounting thread M | M12 | |
| Circular interpolation milling ⌀ Dmin | 39 mm | |
| Circular interpolation milling ⌀ Dmax | 54 mm | |
| Ramping angle αmax | 1.98 degrees | |
| Ramping length L for αmax | 10.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222060 28/2 | |
| EAN / GTIN | 4960664712465 | |
| Manufacturer number | THN07551 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH Harrier 28/2 mm |
||
| Number of cutting edges Z | 2 | 2 |
| Cutting edge ⌀ DC | 28 | 28 |
| Machining strategy | HPC | HPC |
| Circular interpolation milling ⌀ Dmax | 54 | 54 |
| Ramping angle αmax | 1.98 | 2.56 |
| Ramping length L for αmax | 10.4 | 13.43 |
| Type of product | Copy mill | Copy mill |