{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier 25/2 mm
Article no.: 222055 25/2
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Weldon shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 8 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overhang L1 | 60 mm | |
| Overall length Ltot | 117 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 33 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 2.79 degrees | |
| Ramping length L for αmax | 7.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222055 25/2 | |
| EAN / GTIN | 4960664707539 | |
| Manufacturer number | THN07630 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
High feed rate milling cutter MFH Harrier 25/2 mm |
|||
| Overhang L1 | 60 | 39 | 39 |
| Cutting edge ⌀ DC | 25 | 25 | 25 |
| Machining strategy | HPC | HPC | HPC |
| ⌀ D3 | 8 | 13 | 15 |
| Circular interpolation milling ⌀ Dmin | 33 | 38 | 40 |
| Circular interpolation milling ⌀ Dmax | 48 | 48 | 48 |
| Type of product | Copy mill | Copy mill | Copy mill |