{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH mini 20/3L mm
Article no.: 221950 20/3L
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 13 mm | |
| maximum cutting depth ap max | 1 mm | |
| Overhang L1 | 80 mm | |
| Overall length Ltot | 160 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| Circular interpolation milling ⌀ Dmin | 33 mm | |
| Circular interpolation milling ⌀ Dmax | 38 mm | |
| Ramping angle αmax | 1.52 degrees | |
| Ramping length L for αmax | 11.3 mm | |
| suitable indexable insert | LOGU 0303.. | |
| Insert screw | 229713 (8IP; 1.2 Nm) | |
| Setting angle κ | 15 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221950 20/3L | |
| EAN / GTIN | 4960664741434 | |
| Manufacturer number | THN07654 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH mini 20/3L mm |
||
| Number of cutting edges Z | 3 | 3 |
| Overhang L1 | 80 | 80 |
| Milling application | Circular milling ;Ramping ;Plunging | Ramping ;Circular milling ;Plunging |
| Shank type | Plain shank | Plain shank |
| Cutting edge ⌀ DC | 20 | 20 |
| Ramping angle αmax | 1.52 | 1.62 |
| Ramping length L for αmax | 11.3 | 12.4 |