{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter 7792VX 100/8 mm
Article no.: 221908 100/8
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Milling application | Circular milling; Plunging; Ramping | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 73 mm | |
| maximum cutting depth ap max | 3.5 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 173 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Ramping angle αmax | 0.28 degrees | |
| Ramping length L for αmax | 72.3 mm | |
| Indexable insert size | 16 | |
| suitable indexable insert | XE.. 1605 | |
| Insert screw | 229920 (TP20; 7.6Nm) | |
| Setting angle κ | 16 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221908 100/8 | |
| EAN / GTIN | 4059782504585 | |
| Manufacturer number | 5659956 |
Description
Description:
The unique design of the indexable inserts together with their approach angle in the milling body greatly reduces the radial forces and diverts them into the axial direction. Particularly thick indexable inserts with 4 cutting edges for the heaviest duties and high cost-effectiveness. The tool has particular advantages for face milling and milling deep pockets. With its ground wiper chamfer it is equally well suited also to plunge milling and finish milling operations.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
High feed rate milling cutter 7792VX 100/8 mm |
|||
| Number of cutting edges Z | 8 | 8 | 8 |
| Setting angle κ | 16 | 9 | 16 |
| Milling application | Circular milling ;Plunging ;Ramping | Circular milling ;Ramping ;Plunging | Plunging ;Ramping ;Plunging |
| Overall length Ltot | 50 | 50 | 63 |
| Cutting edge ⌀ DC | 100 | 100 | 100 |
| Ramping length L for αmax | 72.3 | 83.5 | 81.07 |
| Type of product | Copy mill | Copy mill | Copy mill |