{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Adjustable indexable countersinking mill 20 mm
Article no.: 216620 20
Article code:
- Chamfer angle adjustment range: 10-80
- Tool exchange: PowerCard
Product details
Technical Data
| Shank type | Weldon shank | |
| Chamfer angle adjustment range | 10-80 | |
| Tool exchange | PowerCard | |
| Number of cutting edges Z | 1 | |
| Overhang L1 | 30 mm | |
| Overall length Ltot | 95 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| suitable indexable insert | TO.. 0902 | |
| Indexable insert No. 216700; No. 216740; No. 216770 | 14-660 | |
| Insert screw | 219843 (8IP; 1.2 Nm) | |
| Cartridge | 219957 | |
| Clamp screw for cartridge | 219945 | |
| Type of product | Counterbores, countersinks |
Identification numbers & Classifications
| Article number | 216620 20 | |
| EAN / GTIN | 4045197133519 | |
| Manufacturer number | 216620 20 |
Description
Version:
Quiet running due to sturdy design.
Application:
For deburring edges, round holes, and long holes, and for countersinking. Rigid mounting is required (not suitable for power drills).
Steplessly adjustable for angles of 10° - 80°.
Steplessly adjustable for angles of 10° - 80°.
Note:
Scale tolerance ±2.5°. For setting to an exact angular value please use a pre-setting device.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Adjustable indexable countersinking mill 20 mm |
|||
| Number of cutting edges Z | 1 | 2 | 1 |
| Overhang L1 | 30 | 41 | 44 |
| Overall length Ltot | 95 | 102 | 98 |
| suitable indexable insert | TO.. 0902 | 260142 | SP.T1204.. |
| Shank type | Weldon shank | Weldon shank | Weldon shank |
| Shank ⌀ Ds h6 | 20 | 16 | 20 |
| Type of product | Counterbores, countersinks | Counterbores, countersinks | Counterbores, countersinks |