{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Chamfer mill, with bore, Angle γ: 50°
Article no.: 215700 50
Article code:
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| suitable indexable insert | AP.. 1604.. | |
| Angle γ | 50 degrees | |
| Shank type | with bore | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Number of effective inserts Zeff | 3 | |
| Number of indexable inserts | 6 | |
| Overall length Ltot | 50 mm | |
| smallest ⌀ D | 35 mm | |
| largest ⌀ D1 | 73 mm | |
| achievable chamfer width b | 18 mm | |
| achievable chamfer length l | 30 mm | |
| achievable chamfer height h | 23 mm | |
| Mounting bore ⌀ | 27 mm | |
| Feed rate per tooth at hmax | 0.13 mm | |
| Pack of insert screws | 219811 (15IP; 5.0 Nm) | |
| Type of product | Indexable end mill |
Identification numbers & Classifications
| Article number | 215700 50 | |
| EAN / GTIN | 4045197708168 | |
| Manufacturer number | 215700 50 |