{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut 90° shoulder mill MTC short, Weldon shank, ⌀ D / number of teeth Z: 40/4mm
Article no.: 215155 40/4
Article code:
- Setting angle κ: 90
- Milling application: Corner milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 4 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Corner milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 55 mm | |
| Overall length Ltot | 115 mm | |
| Shank ⌀ Ds h6 | 32 mm | |
| ⌀ D3 | 34 mm | |
| Circular interpolation milling ⌀ Dmin | 74 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Circular interpolation milling ap | 1 mm | |
| Ramping angle αmax | 0.9 degrees | |
| Ramping length L for αmax | 31.95 mm | |
| suitable indexable insert | AP.. 1805.. | |
| Pack of insert screws | 219808 (15IP; 3.8 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215155 40/4 | |
| EAN / GTIN | 4045197349224 | |
| Manufacturer number | 215155 40/4 |
Description
Version:
High precision square shoulder milling cutter with irregular pitch for very smooth cutting, very high precision and cutting power. High performance indexable square shoulder milling cutter with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For face milling to large depths, also slotting. General use in all steels including stainless steels.
Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).