{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 4 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| suitable indexable insert | XNEX 0806.. | |
| Pack of insert screws | 219798 1 (15IP; 3.8 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215102 100/8 | |
| EAN / GTIN | 4062406088217 | |
| Manufacturer number | 215102 100/8 |
Description
Version:
Robust shoulder milling cutter. Insert seats enclose the inserts on several sides for stable machining conditions.
For use in combination with indexable insert 215117 UNI as a high feed rate indexable face mill.
For use in combination with indexable insert 215117 UNI as a high feed rate indexable face mill.
Application:
With double-sided 3-edge inserts XNEX0806.. or single-sided 3-edge inserts XNEX0806.. High feed rate.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Shoulder mill 90° 100/8 mm |
||
| Overall length Ltot | 50 | 50 |
| suitable indexable insert | XNEX 0806.. | XNEX 0806.. |
| Shank type | with bore | with bore |
| Pack of insert screws | 219798 1 (15IP; 3.8 Nm) | 219798 1 (15IP; 3.8 Nm) |
| Setting angle κ | 90 | 90 |
| maximum cutting depth ap max | 4 | 4 |
| Spacing of the cutters | unequal spacing | unequal spacing |