{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 40 mm | |
Number of cutting edges Z | 3 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | Ramping; Circular milling; Plunging | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
Overall length Ltot | 40 mm | |
Mounting bore ⌀ | 16 mm | |
⌀ D3 | 30 mm | |
Circular interpolation milling ⌀ Dmin | 70 mm | |
Circular interpolation milling ⌀ Dmax | 78 mm | |
Circular interpolation milling ap | 9 mm | |
Ramping angle αmax | 3.12 degrees | |
Ramping length L for αmax | 27.56 mm | |
suitable indexable insert | ZDHT 1505 | |
Pack of insert screws | 219878 4 (15IP) | |
Type of product | End / face mill |
Article number | 211759 40/3 | |
EAN / GTIN | 4062406681777 | |
Manufacturer number | 211759 40/3 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Aluminium shoulder mill 40/3 |
|||
Mounting bore ⌀ | 16 mm | 16 mm | 16 mm |
Milling application | Ramping; Circular milling; Plunging | End milling | Corner milling; Circular milling; Ramping |
Through-coolant | yes | yes | yes |
suitable indexable insert | ZDHT 1505 | SO.. 1205.. | AP.. 1805.. |
Shank type | with bore | with bore | with bore |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees |
Type of product | End / face mill | End / face mill | End / face mill |