GARANT Diabolo solid carbide ball nose slot drill HPC 16 mm

Article no.: 207342 16

⌀ f8 D_C / D_S (mm):

Quantity

Product details

Serie		Diabolo
Cutting edge ⌀ D_C		16 mm
Coating		TiAlN
Tool material		Solid carbide
Norm		Manufacturer’s standard
Type		H
Tolerance nominal ⌀		f8
No. of teeth Z		2
Helix angle		30 degrees
Direction of infeed		horizontal, oblique and vertical
Cutting width a_e for milling operation		0.2×D for side milling; 0.05×D for copy milling
Shank		DIN 6535 HA to h6
Through-coolant		no
Machining strategy		HPC
Flute length L_c		22 mm
Radius R		8 mm
Overall length L		82 mm
Shank ⌀ D_s		16 mm
Feed f_z for side milling in steel < 65 HRC		0.09 mm
Feed f_z for copy milling in steel < 65 HRC		0.09 mm
Colour ring		red
Type of product		Ball-nosed slot drill

200

190

170

150

110

GARANT Diabolo:
Special geometry, coating and carbide for hard machining.
Tolerance: Radius contour = ±0.005 mm.

	This article	Recommendations
	GARANT Diabolo solid carbide ball nose slot drill HPC 16 mm	Solid carbide ball nose slot drill 16 mm	Solid carbide ball nose slot drill 16 mm	Solid carbide ball nose slot drill HPC 16 mm
Cutting width a_e for milling operation	0.2×D for side milling ;0.05×D for copy milling	0.05×D for copy milling ;0.05×D for side milling	0.05×D for copy milling ;0.05×D for side milling	0.5×D for side milling ;0.03×D for copy milling
Colour ring	red	without	without	without
Overall length L	82	82	82	82
Radius R	8	8	8	8
Cutting edge ⌀ D_C	16	16	16	16
Flute length L_c	22	22	22	22
Tolerance nominal ⌀	f8	f8	h10	f8