{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide torus cutter 16/3,0 mm
Article no.: 206190 16/3,0
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Flute length Lc | 36 mm | |
| Corner radius R1 | 3 mm | |
| Overhang length L1 incl. recess | 42 mm | |
| Recess ⌀ D1 | 15 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 16 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
| Feed fz for copy milling in short-chipping aluminium | 0.1 mm | |
| Shank tolerance | h6 | |
| Colour ring | yellow | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206190 16/3,0 | |
| EAN / GTIN | 4045197853059 | |
| Manufacturer number | 206190 16/3,0 |
Application Table
N
180
N
140
N
105
N
180
N
130
N
150
N
130
N
110
N
80
N
100
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Tolerances:
R1 > 0.5 − 1.5 tolerance ±0.03.
R1 > 1.5 tolerance ±0.05.
Tolerances:
- Corner radius
R1 > 0.5 − 1.5 tolerance ±0.03.
R1 > 1.5 tolerance ±0.05.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide torus cutter 16/3,0 mm |
||||
| Coating | uncoated | TiAlN | DLC | TiAlN |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.5×D for side milling | 0.3×D for side milling; 0.05×D for copy milling | 0.05×D for copy milling; 0.5×D for side milling | 0.3×D for side milling; 0.5×D for side milling |
| Recess ⌀ D1 | 15 mm | 15 mm | 15 mm | 15.5 mm |
| Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Tolerance nominal ⌀ | h6 | e8 | h6 | e8 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |